A 3D Printed cartridge housing for use with a Darksoft Reporduction BIOS Cartridge or battery-less SuperBIOS for the Capcom System III (CPS3) arcade hardware, or origional BIOS Cartridges that has been modified with the Multi-BIOS and no longer needs a backup battery. Printed in PLA material in either black, to match the original cartridges, or white, to match the other white plastic elements of the CPS3 hardware. This is designed to hold your PCB securly in place so that no vibrations or other movement cause a lockup.
This is not an exact replica of the original BIOS cartridge housing, but rather design was modified to be more amicable for 3D printing while still providing a look and fit similar to the original cartridges; this cartridge housing once installed will fit in the original cartridge brackets of both the caged and non-caged CPS3 boards.
Includes the front and back housings as well as two screws to secure them together. DOES NOT INCLUDE a CPS3 BIOS cartridge.
This housing will not fit an original cartridge with a battery. If you have need for one with a battery window: please contact us to arrange a special order.