MODE SD Card Mount for Sega Dreamcast

  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
MODE SD Card Mount for Sega Dreamcast

Tap for gallery

5.0 average, based on 1 reviews


Product Information


NOTE: The "Rev E" MODE units changed the position of the SATA Drive.The mounts should still work with this change, however the Screwless Hard Drive Brackets do not. We're working on an updated version but take not of this fitment issue before ordering.

A 3D printed mount designed to accommodate your MODE (Micro SD-Card/USB/SATA replacement for the Disc Drive) in Sega Dreamcast Consoles. Printed in PLA material and available in black, or white to match the color of your Sega Dreamcast console. These mounts offer a much improved way to securely mount the MODE device in your console while making the LEDs, buttons and SD card much easier to access. Not only does it make for a much more complete look when the lid is open but it also allows the use of full-sized SD cards and provides storage for 2 additional cards under the lid. The light from the indicator LEDs is passed to the top surface using Fiber Optic cables and the button pass-throughs are provided in silver to make them easier to see. Also Included is a small bracket that will securely hold the back of your Hard Drive (designed for standard 100x70x7mm SSD drives) without the use of screws, making swapping the hard-drive easy, while also ensure that is fully secured when the console is assembled.


  • Securely mount the MODE inside your Dreamcast Console
  • Top plate with a smooth glossy finish to improve the look of your console with the lid open, and prevent dropping things inside the console.
  • SD card extension allows use of full-sized SD cards easily accessible with the lid open.
  • Two extra SD card holders for storing additional cards
  • Button Pass through for access to both buttons on the MODE, provided in a gray/silver color to make them easier to see
  • Fiber Optic LED Pass through allows you to visibly see activity from all 3 LEDs on the mode with the lid open.
  • Screwless Hard Drive bracket allows secure mounting of an SSD hard drive without screws for easy swapping (designed for standard 100x70x7mm SSD drives)
  • Designed for effective air flow. PCB bracket directs airflow across the cooling plate and to the exhaust vent for improved cooling


  • PCB Mounts
  • Top Plate pre-assembled with fiber-optic LED pass throughs, button extensions and SD Card adapter
  • Screwless Hard Drive Bracket (designed for standard 100x70x7mm SSD drives)

* DOES NOT INCLUDE a MODE device. No screws other than the original screws from your GDROM-Drive are needed.

Installation Instructions can be found here.

NOTE: The lower brackets on this mount may need some minor modification when installed on a VA0 Model Console.

Stock Level0 - 2

Customer Reviews

Average Rating: 5


The bit-district MODE mount for both Saturn and Dreamcast are excellent products. Two areas in particular are superior to the competition. 1) Independent light pipes for all 3 MODE LED's 2) Robust mechanism for each MODE button I also want to say that their customer service and support are top notch. Couldn't give this product a higher recommendation.James Kilgore (08 Nov 2020, 16:07)
Write a review

Write Review

Please enter a valid email address.
This field is required.

eCommerce by CubeCart